The factory patchbay is missing on this console but the wiring harness is still there and it has the original Molex pins at both ends. I need to purchase some spare molex connectors 0.093 3X3 and a few 4X4 and an extraction tool.
I ohmed out the power supply rails and nothing shorted in the backplane.
The back plane looks Ok in general. There were some minor repairs done on it in the past.
It needed a good high pressure condensed air blow out.
It powered up and did not blow a fuse.
However the switching logic is not working. The X buss is in that "floating" state near 1-2v instead of a solid 0v or -15v
Troubleshooting Time!
I have a tangent as well and I run music threw it and I see the vu meters go up but I'm not getting sound to play out to the monitors plz help me..:/
ReplyDeleteDavid Perez with dp productions. Thanks